Description
Specifications
Brand: Lanzhd
Instructions:
1: Please install the battery according to "+" and "-", please do not install the wrong (very important),
2: After the battery is completed, it needs to be charged for 3 seconds to activate it for normal use.
3: Output power: 22.5W
(Dual USB output +TYPE-C port/Android port dual input scheme)
4:
OUT1 output: 5V/3.7A, 9V/2.5A, 12V/1.87A (support 5V charging while discharging);
OUT2 Output: 5V/3.7A, 9V/2.5A, 10V/2.25A, 12V/1.87A
(When multiple interfaces output at the same time, only 5V output can be performed)
5:
IN input (micro) : 5V/3A, 9V/2A, 12V/1.5A;
6:
Type-C output: 5V/3.7A, 9V/2.22A,12V/1.67A
(Output function is only supported by PD protocol);
7:
Type-C input: 5V/3A, 9V/2A, 12V/1.5A;
8:
Other functions: Long press the switch button to turn on the LED light,
9:
Battery requirements: 18650 battery without protection plate (65MM long), internal resistance less than 60 milliohm, discharge more than 1C; Other types of batteries are not supported.
Note: Make sure the battery is properly installed.
Includes:
1: Mobile power case +10 pcs 3300mAh battery
-------------------------------------------------
Fast charge specifications (support agreement) :
(With data transmission charging line, one of the following protocols can be successfully communicated with the handshake)
Support 5V, 9V, 12V voltage gear input/output;
Compatible with BC1.2, Apple, Samsung mobile phone fast charge;
Integrated high voltage 10V/2.25A SCP output fast charge protocol;
Integrated QC2.0/QC3.0 output fast charge protocol;
Integrated FCP, AFC input/output fast charge protocol;
Integrated USB C DRP protocol, support input/output fast charge;
Integrated USB Power Delivery (PD2.0/3.0) protocol
Support PD2.0/3.0 input/output protocol
Support USB PD3.0 PPS output protocol
PPS supports 3.3V~11V, 20mV/step output voltage gear
Bidirectional markup codec (BMC) protocol for integrated hardware
Integrated Physical Layer Protocol (PHY)
Integrated hardware CRC
Support Hard Reset
--------------------------------------
Charging specifications:
Support 18W charging, battery current automatic adjustment, charging current up to 5A.
(It is recommended to charge to 100 for the first time, and then charge for a few more hours, so that the battery is completely balanced)
Discharge specification:
Output current capacity: 5V/3.1A; 9 v / 2.22 A; 12 v / 1.67 A
Support line complement, synchronous switch discharge 5V/2A efficiency can reach more than 95%
Multiple protection, high reliability:
Built-in input overvoltage, undervoltage protection;
Integrated output overcurrent, overvoltage, short circuit protection;
Comes with battery overcharge, overdischarge, overcurrent protection
Built-in IC overtemperature protection;
Integrated charge and discharge battery temperature NTC protection;
ESD 4KV,