18650 For mobile power sleeve charging bank housing battery box + 6pcs 3300mAh 18650 battery Removable weld-free

$44.06
$51.83
-$7.77
Color:  1 Set Red
Nominal Voltage:  3.7V
Ships From:  CHINA
Quantity

Description

 
 

18650 mobile power sleeve charging For bank housing battery box + 6 pcs 3300mAh 18650 battery Removable weld-free

100% Brand new !

Specifications

Brand: Lanzhd

 

Instructions:

1: Please install the battery according to "+" and "-", please do not install the wrong (very important),

2: After the battery is completed, it needs to be charged for 3 seconds to activate it for normal use.

3: Output power: 22.5W

(Dual USB output +TYPE-C port/Android port dual input scheme)

4:

OUT1 output: 5V/3.7A, 9V/2.5A, 12V/1.87A (support 5V charging while discharging);

OUT2 Output: 5V/3.7A, 9V/2.5A, 10V/2.25A, 12V/1.87A

(When multiple interfaces output at the same time, only 5V output can be performed)

5:

IN input (micro) : 5V/3A, 9V/2A, 12V/1.5A;

6:

Type-C output: 5V/3.7A, 9V/2.22A,12V/1.67A

(Output function is only supported by PD protocol);

7:

Type-C input: 5V/3A, 9V/2A, 12V/1.5A;

8:

Other functions: Long press the switch button to turn on the LED light,

9:

Battery requirements: 18650 battery without protection plate (65MM long), internal resistance less than 60 milliohm, discharge more than 1C; Other types of batteries are not supported.

Note: Make sure the battery is properly installed.

Includes:

1: Mobile power case +6pcs 3300mAh battery

 

-------------------------------------------------

Fast charge specifications (support agreement) :

(With data transmission charging line, one of the following protocols can be successfully communicated with the handshake)

Support 5V, 9V, 12V voltage gear input/output;

Compatible with BC1.2, Apple, Samsung mobile phone fast charge;

Integrated high voltage 10V/2.25A SCP output fast charge protocol;

Integrated QC2.0/QC3.0 output fast charge protocol;

Integrated FCP, AFC input/output fast charge protocol;

Integrated USB C DRP protocol, support input/output fast charge;

Integrated USB Power Delivery (PD2.0/3.0) protocol

Support PD2.0/3.0 input/output protocol

Support USB PD3.0 PPS output protocol

PPS supports 3.3V~11V, 20mV/step output voltage gear

Bidirectional markup codec (BMC) protocol for integrated hardware

Integrated Physical Layer Protocol (PHY)

Integrated hardware CRC

Support Hard Reset

--------------------------------------

Charging specifications:

Support 18W charging, battery current automatic adjustment, charging current up to 5A.

(It is recommended to charge to 100 for the first time, and then charge for a few more hours, so that the battery is completely balanced)

Discharge specification:

Output current capacity: 5V/3.1A; 9 v / 2.22 A; 12 v / 1.67 A

Support line complement, synchronous switch discharge 5V/2A efficiency can reach more than 95%

Multiple protection, high reliability:

Built-in input overvoltage, undervoltage protection;

Integrated output overcurrent, overvoltage, short circuit protection;

Comes with battery overcharge, overdischarge, overcurrent protection

Built-in IC overtemperature protection;

Integrated charge and discharge battery temperature NTC protection;

ESD 4KV,